RF Meters

RF Meters

Call 407.859.0006 for pricing and shipping details

GIGAHERTZ SOLUTIONS RF METER - HF35C
The HF35C measures radio frequency / microwave radiation in the 800 MHz – 2.5 GHz range and includes audio signal analysis, peak & average settings.
  • A Course measurement range and Fine measurement range provide added value when needing to assess RF emissions
  • Course range covers stronger readings of 1-1999 µW/m²
  • Fine measurement range of 0.1-199.9 µW/m² offers higher sensitivity and allows for accurate detection of lower level signals
  • Audio Identification
    • The meter's audio tone replicates the signal patterns and intensity of measured RF emissions and aids in source identification
  • Peak Settings and Average Settings
    • While measurements taken on the Average Value setting provide a basic sense of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects

    HF35C RF meter includes:
    • HF35C Radio Frequency Meter
    • Logarithmic Periodic Antenna 800 MHz – 2.5 GHz vertically polarized
    • Users' Guide
    • 2 Year Warranty Certificate
    • 9V Rechargeable Battery

Also offers these features:
  • Easy to operate, power the unit on, selecting measurement settings and recording the LCD displayed readings as you walk the meter through your living space
  • Accessorized with a sturdy Logarithmic–Periodic Antenna, designed for directional detection of RF waves.
  • Readings increase when the meter gets closer to or points in the direction of offending sources
  • Detects both analogue and pulsed digital signals (1– 1999 µW/m²)
  • Detects RF radiation generated by cellular phones and cordless phones (Digital or DECT); microwave ovens; wireless communication devices such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games, smart meters and cell phone towers in the operational range of 800 MHz to 2.5 GHz (GSM, UMTS, 2G, 3G, 4G)
Features:
  • Antenna: Directional Logarithmic Periodic “LogPer” 800 MHz – 3.0 GHz 45º
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy / Linearity Deviation: +/– 6 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak, Average, Full signal – Analogue plus Digital (pulsed)
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Operating Time: Alkaline battery provides up to 6–7 hrs continuous EMF testing
  • Measuring Ranges: 0.1 – 199.9 µW/m² // 1 – 1999 µW/m² Capable of 199,900 µW/m² with the external DG20 Attenuator
Calibration:
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every HF35C meter made by Gigahertz has been individually calibrated to a traceable standard.

Protect your Meter Investment with a Rigid Hard Cover Plastic Carrying Case
Ensure your equipment is protected during transport with the CC2 carrying case. The CC2 is a hard plastic carrying case compatible with the HF35C meter.
  • Interior dimensions: 11.5" x 8" x 2.5"

GIGAHERTZ SOLUTIONS RF METER - HF38B
Experience a meter with peak hold features allow for accurate assessment of sources that emit strong, quick bursts of RF energy such as smart meters.
  • Offers a Course, Medium and Fine measurement range
  • Course range covers stronger readings of 1-19.99 mW/m²
  • Increased sensitivity translates into detection of sources otherwise missed by less capable RF detection equipment
  • Audio Identification:
    • The meter's audio tone replicates the signal patterns and intensity of measured RF emissions and aids in source identification

  • Peak Hold, Peak and Average Settings:
    • While measurements taken on the Average Value setting provide a basic sense of RF levels at a test site,the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects
    • Increased frequency response from up to 3.3 GHz (800 MHz to 3.3 GHz)
Also offers these features:
  • Easy to operate, power the unit on, selecting measurement settings and recording the LCD displayed readings as you walk the meter through your living space
  • Accessorized with a sturdy Logarithmic–Periodic Antenna, designed for directional detection of RF waves. Readings increase when the meter gets closer to or points in the direction of offending sources
  • Detects both analogue and pulsed digital signals
  • Detects RF radiation generated by cellular phones and cordless phones (Digital or DECT); microwave ovens; wireless communication devices such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games, smart meters and cell phone towers (GSM, UMTS, 2G, 3G,4G)
Features:
  • Antenna: Directional Logarithmic Periodic “LogPer” 800MHz – 3.3 GHz 45º
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy / Linearity Deviation: +/– 6 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak Hold, Peak, Average, Full signal – Analogue plus Digital (pulsed)
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Operating Time: Alkaline battery provides up to 6–7 hrs continuous EMF testing
  • Measuring Ranges: 0.01 – 19.99 µW/m² // 0.1 – 199 µW/m² // 1.0 – 19.99 mW/m² Capable of 1,999,000 µW/m² with the external DG20 Attenuator
Calibration:
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every HF38B meter made by Gigahertz has been individually calibrated to a traceable standard.
HF38B RF meter includes:
  • HF38B Radio Frequency Meter
  • Logarithmic Periodic Antenna 800MHz – 3.3 GHz, vertically polarized
  • Users' Guide
  • 2 Year Warranty Certificate
  • 9V Rechargeable Battery

HFE35C - INTERMEDIATE LEVEL RF ANALYZER
The versatile HFE35C Intermediate RF METER measures radio frequency/microwave radiation in the 27 MHz – 3.3 GHz range. The HFE35C includes 2 Antennas - standard directional antenna plus omni-directional antenna or 3D antenna.
Accurate Peak Measurements provide invaluable information for the layperson or technician who needs to assess potential biological impacts at an RF contaminated site. The HFE35C equipped with the Isotropic Antenna takes biological assessment one step further. Referred to as 3D Measurement Technology the Ultra Broadband Isotopic Antenna has the ability to assimilate and read the RF exposure conditions typical for a human body. A measurement taken with this equipment provides a 360 degree RF exposure snap shot.
  • Equipped with Two Antennas - enhanced circuitry for use with the Ultra Broadband Isotropic UBB27 Antenna (Boosted Frequency Range of 27 MHz– 3.3 GHz) and the directional Logarithmic– Periodic Antenna designed to make source identification simple and efficient. Readings increase when the antenna is pointed in the direction of or moved closer to offending sources (Frequency Range of 800 MHz to 2.5 GHz).
  • Detects both analogue and pulsed digital signals (1– 1999 µW/m2)
  • Detects RF radiation generated by cellular phone and cordless phones (DECT); microwave ovens; Radar; wireless communication devices (such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games); smart meters; cell phone towers in the operational range of 800 MHz @ 2.5 GHz (GSM, UMTS, 2G, 3G, 4G)
  • In addition the UBB27 Antenna detects RF radiation generated by FM Radio; Amateur Radio; Digital & Analog TV
PLUS
Professional Level Features Offered at a Unique Price to Performance Ratio:
The meter's audio tone replicates the patterns and intensity of measured RF emissions
  • Detects Full RF signal comprised of both analogue digital signals and pulsed digital signals
  • Coarse (0–1999 W/m) and Fine (0–199.9 W/m) Range Options. A Fine range option provides added value when needing accurate assessment of weaker signals
  • Peak and Average Settings: While measurements taken on the Average Value setting provide a basic impression of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects.
Designed to meet Building Biology RF measurement performance requirements

FEATURES:
  • Antennas: Omni–directional UBB27 Isotropic 27 MHz – 3.3 GHz – 360º Directional Logarithmic Periodic “LogPer” 800 MHz – 3.0 GHz 45º
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy/ Linearity Deviation: +/– 6 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak , Average, Full signal – Analogue plus Digital(pulsed)
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Operating Time: Alkaline battery provides up to 6–7 hrs continuous EMF testing
  • Measuring Ranges: 00.1 – 199.9 µW/m² // 1 – 1999 µW/m²
    • Capable of 199,900 µW/m² with the external DG20_G3 Attenuator
    • Capable of 0.01 µW/m² with the external HV10_27G3 Amplifier (10x)
    • Capable of 0.001 µW/m² with the external HV30_27G3 Amplifier (100x)
    • Capable of 0.001 µW/m² with the external HV20_2400G10 Amplifier (100x)
  • Carrying Case: Sturdy plastic storage/carrying case included
CALIBRATION:
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that everyHFE35C meter made by Gigahertz has been individually calibrated to a traceable standard.
HFE35C RF METER INCLUDES:
  • HFE35C RADIO FREQUENCY ANALYZER
  • Antenna - Ultra Broadband Isotropic (27 MHz to 3.3 GHz) (UBB27)
  • Antenna - Logarithmic Periodic 800 MHz – 2.5 GHz, vertically polarized
  • Plastic Carrying Case – K5 (33 x 27 x 8) cm
  • Plastic Antenna Cover – UBB27
  • Users' Guide – RF Analyzer and UBB27 Antenna
  • 2 Year Warranty Certificate
  • 9V Alkaline Battery

HFE35C Meter Kit - INTERMEDIATE LEVEL RF ANALYZER
The versatile HFE35C Intermediate RF METER measures radio frequency/microwave radiation in the 27 MHz – 3.3 GHz range. The HFE35C includes 2 Antennas - standard directional antenna plus omni-directional antenna or 3D antenna.
Accurate Peak Measurements provide invaluable information for the layperson or technician who needs to assess potential biological impacts at an RF contaminated site. The HFE35C equipped with the Isotropic Antenna takes biological assessment one step further. Referred to as 3D Measurement Technology the Ultra Broadband Isotopic Antenna has the ability to assimilate and read the RF exposure conditions typical for a human body. A measurement taken with this equipment provides a 360 degree RF exposure snap shot.
  • Equipped with Two Antennas - enhanced circuitry for use with the Ultra Broadband Isotropic UBB27 Antenna (Boosted Frequency Range of 27 MHz– 3.3 GHz) and the directional Logarithmic– Periodic Antenna designed to make source identification simple and efficient. Readings increase when the antenna is pointed in the direction of or moved closer to offending sources (Frequency Range of 800 MHz to 2.5 GHz).
  • Detects both analogue and pulsed digital signals (1– 1999 µW/m2)
  • Detects RF radiation generated by cellular phone and cordless phones (DECT); microwave ovens; Radar; wireless communication devices (such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games); smart meters; cell phone towers in the operational range of 800 MHz @ 2.5 GHz (GSM, UMTS, 2G, 3G, 4G)
  • In addition the UBB27 Antenna detects RF radiation generated by FM Radio; Amateur Radio; Digital & Analog TV
PLUS
Professional Level Features Offered at a Unique Price to Performance Ratio:
The meter's audio tone replicates the patterns and intensity of measured RF emissions
  • Detects Full RF signal comprised of both analogue digital signals and pulsed digital signals
  • Coarse (0–1999 W/m) and Fine (0–199.9 W/m) Range Options. A Fine range option provides added value when needing accurate assessment of weaker signals
  • Peak and Average Settings: While measurements taken on the Average Value setting provide a basic impression of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects.
Designed to meet Building Biology RF measurement performance requirements

FEATURES:
  • Antennas: Omni–directional UBB27 Isotropic 27 MHz – 3.3 GHz – 360º Directional Logarithmic Periodic “LogPer” 800 MHz – 3.0 GHz 45º
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy/ Linearity Deviation: +/– 6 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak , Average, Full signal – Analogue plus Digital(pulsed)
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Operating Time: Alkaline battery provides up to 6–7 hrs continuous EMF testing
  • Measuring Ranges: 00.1 – 199.9 µW/m² // 1 – 1999 µW/m²
    • Capable of 199,900 µW/m² with the external DG20_G3 Attenuator
    • Capable of 0.01 µW/m² with the external HV10_27G3 Amplifier (10x)
    • Capable of 0.001 µW/m² with the external HV30_27G3 Amplifier (100x)
    • Capable of 0.001 µW/m² with the external HV20_2400G10 Amplifier (100x)
  • Carrying Case: Sturdy plastic storage/carrying case included
CALIBRATION:
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that everyHFE35C meter made by Gigahertz has been individually calibrated to a traceable standard.
HFE35C RF METER INCLUDES:
  • HFE35C RADIO FREQUENCY ANALYZER
  • Antenna - Ultra Broadband Isotropic (27 MHz to 3.3 GHz) (UBB27)
  • Antenna - Logarithmic Periodic 800 MHz – 2.5 GHz, vertically polarized
  • Plastic Carrying Case – K5 (33 x 27 x 8) cm
  • Plastic Antenna Cover – UBB27
  • Users' Guide – RF Analyzer and UBB27 Antenna
  • 2 Year Warranty Certificate
  • 9V Alkaline Battery

GIGAHERTZ SOLUTIONS RF METER KIT - HFE59B
ADVANCED OR PROFESSIONAL LEVEL RF ANALYZER
Sophisticated Source Identification plus Enhanced Accuracy Features Make this Radio Frequency Analyzer an RF Technician's 1st Choice
Our Best Professional Level RF Meter - Measuring Range (27 MHz – 3.3 GHz) Includes 2 Antennas - standard directional antenna plus omni-directional antenna or 3D antenna, peak hold feature, data output.
  • Equipped with Two Antennas - The 3D Ultra Broadband Isotropic UBB27 Antenna assimilates and reads the RF exposure conditions typical for a human body. Provides a 360 degree RF snap shot – Boosted Frequency Range of 27 MHz– 3.3 GHz– Outstanding High Frequency Measurement Performance; the directional Logarithmic– Periodic Antenna facilitates source identification. Readings increase when the antenna is pointed in the direction of or moved closer to offending sources – Frequency Range of 800 MHz to 2.5 GHz
  • High Pass Filter HP800_G3: This accessory filters out lower frequency signals (below 800 MHz) allowing for more comprehensive analysis of RF measurements
  • Optional Pulsed Signal Setting or Analog Signal Setting: Allows for in–depth signal identification and RF risk assessment.Studies show that digital signals have the greatest biological impact
  • AC/DC Outputs for Data Logging Functions: Allows for thorough test site assessment through data logging. Also designed to interface with computers and the NFA 1000 Data Logger
  • Detects RF radiation generated by cellular phones and cordless phones (DECT); microwave ovens; Radar; wireless communication devices (such as internet routers, WLAN, Wi-Fi, baby monitors, Bluetooth, video games); smart meters; cell phone towers in the operational range of 800MHz @ 2.5 GHz (GSM, UMTS, 2G, 3G, 4G)
  • The UBB27 Antenna in addition detects RF radiation generated by TV; FM Radio; Amateur Radio; Digital & Analog TV
Plus enhanced accuracy features:
  • Three Measuring Ranges: (Coarse: 1.0 – 19,999 µW/m² ; Medium: 0.1– 199.9 µW/m²; Fine: 0.01– 19.99 µW/m²) Medium range and Fine range options provide added value when needing accurate assessment of moderate to weaker signals
  • Comes Equipped with the Attenuator DG20 G3: the Attenuator boosts the meter's maximum measuring range by a factor of 100 (20 dB) which means stronger exposure levels can be accurately assessed up to 2,000,000 µW/m²
  • Peak Hold Feature guarantees accurately capturing momentary pulses, as in those emitted by smart meters
Plus:
  • The meter's audio tone replicates the patterns and intensity of measured RF emissions
  • Plug in ear phone accessory is optional
  • Comes equipped with both the NiMH rechargeable battery and battery charger, a storage/carrying case designed to hold all of the HFE59B components, it can accommodate an additional RF meter or EMF meter
Features:
  • Antennas: Omni–directional UBB27 Isotropic 27 MHz – 3.3 GHz – 360º Directional Logarithmic Periodic “LogPer” 800 MHz – 3.0 GHz 45º
  • AC/DC Outputs: Facilitates equipment interfacing: oscilloscopes / spectrum analyzers / full audio assessment / data logging (5 mV DC or 10 mV per digit) switchable
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy/ Linearity Deviation: +/– 3 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak, Average, and Peak Hold feature – Radar / UMTS / 3G / 4G – Able to measure Analogue and Digital (pulsed) separately
  • Power Supply: Rechargeable battery (NIMH supplied) – compatible with 9 Volt alkaline battery
  • Battery Recharging Unit: 12VDC battery charger supplied
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Operating Time: NIMH provides up to 7 hours continuous use/ alkaline disposable provides up to 24 hrs continuous EMF testing
  • Measuring Ranges:
    • 0.01 – 19.99 µW/m² // 00.1 – 199.9 µW/m² // 0.01 – 19.99 mW/m²
    • Capable of 1,999 mW/m² with the external DG20_G3 Attenuator 100x)
    • Capable of 0.001 µW/m² with the external HV10_27G3 Amplifier (10x)
    • Capable of 100 nW/m² with the external HV30_27G3 Amplifier (100x)
    • Capable of 100 nW/m² with the external HV20_2400G10 Amplifier (100x)
  • Carrying Case: Sturdy plastic storage/carrying case included
Calibration:
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that very HF59B meter made by Gigahertz has been individually calibrated to a traceable standard.
HFE59B RF meter includes:
  • HFE59B Radio Frequency Analyzer
  • Plastic Carrying Case – K2 (33x27x16) cm
  • Antenna - Ultra Broadband Isotropic (27 MHz to 3.3 GHz) (UBB27)
  • Antenna - Logarithmic Periodic 800 MHz – 2.5 GHz vertically polarized
  • Plastic Antenna Cover – UBB27
  • Users Guide – RF Analyzer and UBB27 Antenna
  • 2 Year Warranty Certificate
  • Rechargeable Battery Pack
  • 120 VAC Battery Charger (220 VAC charger available on request)
  • Silicone protective cover – black
  • RF-Attenuator – DG20_G10 (-20 dB or -100x)
  • RF-Preamplifier – HV10_27G3 (+10 dB or +10x)
  • High Pass Filter – HP800_G3 (800 MHz)

HFW35C - Specialized, Intermediate level RF Analyzer for Higher RF Frequencies
For measuring higher frequency sources of radio frequency/microwave radiation (2.4 GHz – 6.0 GHz).
  • New wireless technologies such as Bluetooth, WLAN, WiMAX and cordless telephones operate in the higher frequency ranges of 2.4 GHz – 6 GHz. The HFW35C has been designed to detect and measure the RF emissions generated within this range.
  • The compact and sturdy Logarithmic–Periodic Antenna has been engineered to capture the shorter–in–length, radio frequency waves emitted by wireless devices employing high frequency radio waves
  • Readings increase when the antenna is pointed in the direction of or moved closer to offending sources
  • Built in filters actively weed out frequencies outside of the 2.4 GHz– 6 GHz range. This allows for confident measurement of sources within the desired frequency range
  • Detects RF radiation generated by WLAN/Wi-Fi (2.4 – 5.0 GHz); 5.8 GHz Cordless Phones, and more.
PLUS
Professional Level Features Offered at a Unique Price to Performance Ratio:
  • The audio tone replicates the patterns and intensity of measured RF emissions
  • Pulsed Digital Signal Setting or Analog Signal Setting allows for in–depth signal identification and source identification as well as facilitating risk assessment (studies show that digital signals have the greatest biological impact)
  • A Fine range option provides added value when needing accurate assessment of weaker signals. (Coarse: 0–1999 W/m and Fine: 0–199.9 W/m Range Options)
  • Peak and Average Settings: While measurements taken on the Average Value setting provide a general impression of RF levels at a test site, the Peak Value setting reveals the highest levels of RF being emitted. The Peak Value is regarded as the measurement critical to assessing potential biological effects
Designed to meet Building Biology RF measurement performance requirements

FEATURES
  • Antenna: Directional Logarithmic Periodic “LogPer” 2.4 GHz – 6.0 GHz 45º
  • LCD Display (3.5 digits): Easy to read 3.5 digit display
  • Accuracy / Linearity Deviation: +/– 6 dB
  • Audible Tone: The meter’s audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak, Average – able to measure Analogue and Digital (pulsed) separately
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use – will auto–power off after 40 min of continuous EMF testing
  • Measuring Ranges: 00.1 – 199.9 µW/m² // 1 – 1999 µW/m² Capable of 0.001 µW/m² with the external
  • HV20_2400G10 Amplifier (100x)
  • Operating Time: Alkaline battery provides up to 6–7 hrs continuous EMF testing
CALIBRATION
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every HF59B meter made by Gigahertz has been individually calibrated to a traceable standard.
HFW35C RF METER INCLUDES
  • HFW35C RADIO FREQUENCY METER – Wi-Fi Range
  • Logarithmic Periodic Antenna 2.4 GHz- 6.0 GHz, vertically polarized
  • Users' Guide
  • 2 Year Warranty Certificate
  • 9V Alkaline Battery

hfw59d-amp 2 HFW59D RF METER - Specialized, Professional level RF Analyzer for Higher RF Frequencies
Wireless technologies such as Radar, Bluetooth, WLAN, WiMAX and cordless telephones operate in the higher frequency ranges of 2.4 GHz – 10 GHz. The HFW59D has been designed to detect and measure the RF emissions generated within this range including the high radar frequency band at 8.5 through 9.5 GHz (Aviation, Naval, Military, Traffic Control Radar). Includes the HV20 pre-amplifier.
  • Fully compensated up to 10 GHz which includes the frequently used high radar frequency band at 8.5 through 9.5 GHz (Aviation, Naval, Military, Traffic Control Radar)
  • Maximum VBW for realistic readings of even the shortest radar pulses(smaller than 0.5 µS)
  • Optimized peak hold function
  • High sensitivity through the whole frequency range: 0.01 µW/m² display resolution with the HV20_2400G10 pre-amplifier for measurement of the smallest wireless LAN signals
  • Includes a specially designed LogPer antenna with optimized reception pattern
  • Contains an internal high pass filer at 2.4GHz to reliably suppress the commonly dominant GSM and DECT cordless phone frequencies
  • Calibrated AC signal output for demodulated signal analysis
  • Scalable DC output for data logging.
  • Specifically designed for the measurement of modulated signals ("pulse" mode)
FEATURES:
  • Antenna: Directional Logarithmic Period "LogPer" 2.4 - 10 GHz 45º
  • AC/DC Outputs: Facilitates equipment interfacing: oscilloscopes / spectrum analyzers / full audio assessment / data logging (5mV DC or 10mV per digit) switchable
  • LCD Display: Easy to read 3.5 digit display
  • Accuracy / Linearity Deviation: +/- 4.5dB
  • Audible Tone: The meter's audio tone replicates the patterns and intensity of measured RF emissions
  • Signal Detection Type: Peak,Average, and Peak Hold feature
  • Battery: Rechargeable battery and power adapter supplied
  • Battery Low Indicator: Meter will auto–power off 3 minutes following battery low signal display
  • Auto Power Off: Saves on battery use - will auto-power off after 40 min of continuous EMF testing
PLUS
  • The meter's audio tone replicates the patterns and intensity of measured RF emissions
  • Plug in ear phone accessory is optional
  • Comes equipped with both the NiMH rechargable battery and battery charger, a storage/carrying case to hold all the components for the HFW59D.
HFW59D RF Meter Includes:
  • HFW59D: Radio Frequency Analyzer
  • Plastic Carrying Case: K5 (33x 27 x 8 cm) (13 x 10.6 x 3.2 inches)
  • Antenna: Logarithmic Periodic 2.4 - 10 GHz
  • RF Preamplifier: HV20_2400G10
  • Users Guide: RF Analyzer
  • 2 Year Warranty: Certificate
  • Battery Pack: Rechargable with Charger/Power Supply
  • Silicone Protective Cover: Black

RFCover1 PROTECTIVE COVER - ADD SOME POLISH TO YOUR RF TOOL KIT
Protect your equipment investment with a black flexible soft PROTECTIVE COVER. The RFCover1 is compatible with all RF Analyzers: HF32D, HF35C, HFE35C, HF38B, HFW35C, HF59B, HFE59B, HFW59B (Black in Color).
The Protective Cover is Designed To:
  • Custom fit any Gigahertz Solutions RF Analyzer
  • Improve grip
  • Protect your RF Analyzer from rough handling, bumps and minor drops
  • Made From Durable Silicone
  • Available only in black for the HF Meter Series
  • Optional for all HF Series Meters