EMF METERS

 

Call 407.859.0006 for pricing and shipping details

 

 

 

 

 

GIGAHERTZ SOLUTIONS ME3030B EMF METER

  

CALL 407.859.0006 for pricing and shipping details

 

EXCEPTIONAL ENTRY LEVEL EMF METER

For basic low frequency EMF detection purposes - measures AC electric fields and AC magnetic fields / gauss meter - 16 hertz to 2000 hertz (ELF - Extra Low Frequency).

  • Easy to Operate, simply power on the unit, select mode of operation, “E” for Electric field or ”M” for Magnetic field and then scan area of concern
  • LCD digital display will indicate the sum total field strength of all sources within its frequency range
  • Audible tone similar to that of a Geiger counter indicates level of exposure
  • Convenient conversion table on back of meter converting nT to mG
  • Excellent Sensitivity - able to accurately identify Electric fields down to 1 V/m and Magnetic fields to 1 nT or 0.01 mG
  • Readings are 98% accurate within the 16 Hertz to 2000 Hertz frequency range. Sources in this range include all standard household appliances, electronic devices, electrical wiring and wiring errors, high voltage power lines, power transformers
  • Powered by a 9 V alkaline battery (included)
  • All Gigahertz Solutions Meters are backed by a 2 year manufacturer's warranty

 

Designed to meet Building Biology EMF Measurement

Performance Requirements


Features:

  • Auto Power Off:  Saves on battery use – will auto-power off after 40 min of continuous EMF testing
  • Audible Tone:  Audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
  • LCD Display:  Easy to read 3.5 digit display
  • Power Supply:  9 Volt alkaline battery included
  • Battery Low Indicator:  Meter will auto-power off 3 minutes following battery low signal display
  • Operating Time:  Alkaline disposable provides 24 - 36 hrs of continuous EMF testing
  • AC Electric Field:  Value displayed in Volts per meter V/m
  • AC Magnetic Fields:  Value displayed in nanotesla nT. Note: 100 nT = 1 mG (conversion table on back of meter for convenience)
  • Singe Axis Measurement:  Beneficial for source detection

 

Calibration:

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every ME3030B meter made by Gigahertz has been individually calibrated to a traceable standard.

 

TECHNICAL DATA

 

SPECIFICATION

VALUE

Frequency Response

Flat Frequency Response from

16 Hz to 2 kHz at -2 db

Electric Field Sensor

Single Axis Directional

Magnetic Field Sensor

Single Axis Directional

Signal Rating

RMS

Magnetic Field Measuring Range

1-1999 nanotesla, nT (0.01-20 milligauss, mG)

Electric Field Measuring Range

1-1999 Volts/meter

Resolution Magnetic Field

Finest Reading -1 nT (0.01 mG)

Resolution Electric Field

Finest Reading – 1 V/m

Accuracy / Basic Tolerance

+/- 2% @ 50 Hz, 20 degrees Celsius, 45% relative Humidity +/- 20 Digits

Dimensions

7.4 x 18.0 x 3.2 cm (W x L x H)

approx 3 x 7 x 1.25 inches

Weight of Meter

175 grams

Case Material

Plastic


 

ME 3030B meter includes:

  • ME3030B EMF Meter
  • Users' Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot - for AC electric field measurements
  • 9V Alkaline Battery

 


 

ME3830B - OUR BEST SELLING ENTRY LEVEL EMF METER

 

CALL 407.859.0006 for pricing and shipping details


Best selling entry level EMF Meter - measures AC electric fields and AC magnetic fields / gauss meter - 16 Hertz to 100 kHz - increased frequency range for dirty electricity

  • Best frequency detection in its price range
  • Offers all the features of the ME3030B plus a boosted Frequency Range
  • 98% accuracy in a frequency range of 16 Hertz to 100,000 Hertz translates into source identification confidence
  • Capture all low frequency polluters, sources such as all standard household appliances, electrical wiring and wiring errors, power lines and transformers
  • Identifies higher frequency sources such as all energy efficient appliances, fluorescent and compact fluorescent lighting, dimmer switches and computer monitors
  • Evaluates electrical aberrations such as dirty electricity and power line transients
  • All Gigahertz Solutions are backed by a 2 year manufacturer's warranty

 

Designed to meet Building Biology EMF Measurement

Performance Requirements 

 

Extended Frequency Range to 100,000 Hz


FEATURES

  • Auto Power Off:  saves on battery use – will auto-power off after 40 min of continuous EMF testing
  • Audible Tone:  audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
  • LCD Display: easy to read 3.5 digit display
  • Power Supply: 9 Volt alkaline battery included
  • Battery Low Indicator:  meter will auto-power off 3 minutes following battery low signal display
  • Operating Time:  alkaline disposable provides 24 - 36 hrs of continuous EMF testing
  • AC Electric Field:  Value displayed in Volts per meter
  • AC Magnetic Fields:  Value displayed in nT. Note: 100 nT = 1 mG (conversion table on back of unit for convenience)
  • Singe Axis Measurement:  Beneficial for source detection

 

CALIBRATION

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that everyME3830B meter made by Gigahertz has been individually calibrated to a traceable standard.

 

TECHNICAL DATA

 

SPECIFICATION

VALUE

Frequency Response

Flat Frequency Response from

16 Hz to 100 kHz at -2 db

Electric Field Sensor

Single Axis Directional

Magnetic Field Sensor

Single Axis Directional

Signal Rating

RMS

Magnetic Field Measuring Range

1-1999 nanotesla, nT

(0.01-20 milligauss, mG)

Electric Field Measuring Range

1-1999 Volts/meter

Resolution Magnetic Field

Finest Reading -1 nT (0.01 mG)

Resolution Electric Field

Finest Reading – 1 V/m

Accuracy / Basic Tolerance

+/- 2% @ 50 Hz, 20 degrees Celsius,

45% relative Humidity +/- 20 Digits

Dimensions

7.4 x 18.0 x 3.2 cm (W x L x H)

approx 3 x 7 x 1.25 inches

Weight of Meter

175 grams

Case Material

Plastic

SUPPLIED WITH

  • ME3830B EMF Meter
  • Users' Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot - for AC electric field measurements
  • 9V Alkaline Battery

 

 


 

ME3840B - Intermediate Level EMF Meter (5 Hz – 100,000 HZ)

 

CALL 407.859.0006 for pricing and shipping details


Advanced intermediate EMF Meter - measures AC electric fields and AC magnetic fields / gauss meter - 5 hertz to 100 kilohertz (kHz) with frequency filters for source analysis.

A balanced Meter between More Complex EMF Detection Capabilities, 'Easy Use' and 'Best Accuracy'

  • The ME3840B offers all the features of the previous models plus a frequency filter to aid with source identification
  • Captures low frequency sources down to 5 Hz
  • 98% accuracy in a frequency range of 5 Hertz to 100,000 hertz translates into source identification confidence - best frequency detection in its price range
  • Capture all low frequency polluters, sources such as all standard household appliances, electrical wiring and wiring errors, power lines and transformers
  • Identifies higher frequency sources such as all energy efficient appliances, fluorescent and compact fluorescent lighting, dimmer switches and computer monitors
  • Evaluates electrical aberrations such as dirty electricity and power line transients
  • All Gigahertz Solutions are backed by a 2 year manufacturer's warranty

 

Designed to meet Building Biology EMF Measurement

Performance Requirements 

 

Frequency Filter to aid with source identifications

Extended Frequency Range to 100,000 Hz

FEATURES

 

  • Frequency Filter:  built in F1B2H31 frequency filter – four filter settings that provides manual frequency analysis: 
    • 5 Hz to 400 KHz – Complete frequency range of meter – Best suited for tripod measurements
    • 16.7 Hz – Electric Railway (Europe Only)
    • 50 Hz to 400 KHz – Typical measurement setting – Captures low and high frequency emissions
    • 2 kHz to 400 kHz – High Frequency Transients and "Dirty Electricity"
  • Auto Power Off:  saves on battery use – will auto-power off after 40 min of continuous EMF testing
  • Audible Tone:  audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
  • LCD Display:  easy to read 3.5 digit display
  • Power Supply:  9 Volt alkaline battery included
  • Battery Low Indicator:  meter will auto-power off 3 minutes following battery low signal display
  • Operating Time:  alkaline disposable provides 24 - 36 hrs of continuous EMF testing
  • AC Electric Field:  Value displayed in Volts per meter
  • AC Magnetic Fields:  Value displayed in nT. Note: 100 nT = 1 mG (conversion table on back of unit for convenience)
  • Singe Axis Measurement:  Beneficial for source detection

 

CALIBRATION

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every ME3840B meter made by Gigahertz has been individually calibrated to a traceable standard.

 

TECHNICAL DATA

SPECIFICATION

VALUE 

Frequency Response

Flat Frequency Response from

16 Hz to 100 KHz at -2 db

Electric Field Sensor

Single Axis Directional

Magnetic Field Sensor

Single Axis Directional

Signal Rating

RMS

Magnetic Field Measuring Range

1-1999 nanotesla, nT

(0.01-20 milligauss, mG)

Electric Field Measuring Range

1-1999 Volts/meter

Resolution Magnetic Field

Finest Reading -1 nT (0.01 mG)

Resolution Electric Field

Finest Reading – 1 V/m

Accuracy / Basic Tolerance

+/- 2% @ 50 Hz, 20 degrees Celsius,

45% relative Humidity +/- 20 Digits

Dimensions

7.4x18.0x3.2 cm (W x L x H)

approx 3 x 7 x 1.25 inches

Weight of Meter

175 grams

Case Material

Plastic

 

SUPPLIED WITH

  • ME3840B EMF Meter
  • Users' Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot - for AC electric field measurements
  • 9V Alkaline Battery

 

 


 

ME3851A - PROFESSIONAL LEVEL EMF METER

 

CALL 407.859.0006 for pricing and shipping details


Affordable, yet created for professionals; the 3851A integrates sophisticated technology with simplified measurement - measures AC electric fields and AC magnetic fields / gauss meter – 5 Hertz to 100 Kilohertz - AC and DC data outputs and increased sensitivity.

 

  • Single Axis Measurement:  ten times more sensitive than the Entry / Intermediate level meters - puts measurement control in the hands of the technician
  • F1B2H31 Frequency Filter:  built in module provides manual isolation of multiple sources - delivers source identification with ease, efficiency and precision
  • Offers two measurement ranges standard and high. On the high precision setting one can measure to an accuracy of 0.1 V per meter and 0.1 nT or 0.001 mG
  • Output Interfacing Capabilities:  AC/DC outputs facilitate data logging and use of a full spectrum analyzer -means more in-depth analysis and unmanned measurement
  • Verifiable Accuracy:  A self test mode and the offer of a manufacturer's calibration certificate guarantees reliability - means no guess work

 

PLUS

  • Includes a NiMH rechargeable battery and charging unit
  • Precise potential free (without a ground) measurement option
  • Plastic Carrying case included
  • All Gigahertz Solutions are backed by a 2 year manufacturer's warranty

Designed to meet Building Biology EMF Measurement

Performance Requirements

 

FEATURES

  • Auto Power Off: saves on battery use – will auto-power off after 40 min of continuous EMF testing
  • Audible Tone:  audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
  • LCD Display:  easy to read 3.5 digit display
  • Frequency Filter:  built in F1B2H31 frequency filter – four filter settings that provides manual frequency analysis: 
    • 5 Hz to 100 kHz – Complete frequency range of meter – Best suited for tripod measurements
    • 16.7 Hz – Electric Railway (Europe Only)
    • 50 Hz to 100 kHz – Typical measurement setting – Captures low and high frequency emissions
    • 2 kHz to 100 kHz – High Frequency Transients and “Dirty Electricity”
  • AC/DC Outputs:   facilitates equipment interfacing to oscilloscopes, spectrum analyzers, full audio assessment, data logging (0.5 mV DC per digit)
  • Power Supply:  rechargeable battery (NIMH supplied) – compatible with 9 Volt alkaline battery
  • Battery Recharging Unit: 12 VDC battery charger supplied
  • Battery Low Indicator:  meter will auto-power off 3 minutes following battery low signal display
  • Operating Time:  NIMH provides 6 to 8 hours continuous use. Alkaline disposable provides up to 24 hrs continuous EMF testing
  • Self Test Mode:  a ‘test for zero’ setting - verifies measurement accuracy and meter calibration (please refer to product manual for a more detailed explanation)
  • Carrying Case:  sturdy plastic storage/carrying case included
  • AC Electric Field:  Value displayed in Volts per meter
  • AC Magnetic Fields:  Value displayed in nanotesla “nT”. Note: 100 nT = 1 mG
  • Singe Axis Measurement:  Beneficial for source detection

 

CALIBRATION

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments.  This guarantees that every ME 3851A meter made by Gigahertz has been individually calibrated to a traceable standard.

 

TECHNICAL DATA

SPECIFICATION

VALUE

Frequency Response

Flat Frequency Response from 5 Hz to

100 KHz at -1 db

Electric Field Sensor

Single Axis Directional

Magnetic Field Sensor

Single Axis Directional

Signal Rating

RMS

Magnetic Field

Measuring Range

Fine: 0.1-199 nanotesla, nT

(0.001-2 milligauss, mG)

Coarse: 1-1999 nanotesla

(nT) (0.01-20 milligauss)

Electric Field

Measuring Range

Fine: 1-199 Volts/meter

Coarse: 1-1999 Volts/meter

Resolution Magnetic Field

Finest Reading - Fine Range – 0.1 nT (0.001 mG)

Finest Reading - Coarse Range – 1 nT (0.01 mG)

Resolution Electric Field

Finest Reading - Fine Range – 0.1 V/m

Finest Reading - Coarse Range – 1 V/m

Accuracy / Basic Tolerance

+/- 2% @ 50 Hz, 20 degrees Celsius, 45% relative Humidity

+/- 7 Digits

Linearity Deviation

Fine:  199 nT +/- 0.3nT // 199 V/m +/- 0.2 V/m

Coarse: 1999 nT +/- 3 nT // 1999 V/m +/- 2 V/m

Offset

Fine:  199 nT +/- 0.4 nT // 199 V/m +/- 0.4 V/m

Coarse:  1999 nT +/- 4 nT // 1999 V/m +/- 4V/m

Dimensions

74 x 122 x 31 mm (W x L x H) approx 3 x 4-3/4 x 1.25 inches

Weight of Meter

196 grams

Case Material

Plastic

 SUPPLIED WITH

  • Plastic Carrying Case – K5 (33x27x8) cm
  • ME3851A EMF Meter
  • Users' Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot - for AC electric field measurements
  • Grounding Clip – For direct connection to water pipe
  • 120 VAC Battery Charger (220 VAC charger available on request)
  • 9V Rechargeable Battery

 

 

 


 

ME3951A - Professional Level EMF Meter


CALL 407.859.0006 for pricing and shipping details


Electronic innovations as well as manufacturing trends towards energy efficiency and high performance have created unprecedented assessment challenges for EMF technicians. The extended frequency capability of the ME 3951A Meter provides a measurement solution for the increasingly high frequency ranges produced by new technologies.

  • 5 Hz to 400 KHz, a frequency range unmatched by any other meter in its price range
  • Single axis measurement combined with easy peak value readings puts detection control in the hands of the technician by facilitating source direction identification
  • F1B2H31 built in frequency filter provides three filter settings that manually isolates frequency clutter which allows for source identification accuracy
  • AC/DC outputs provide hook up to specialized equipment for functions such as data logging, full audio assessments and full spectrum analysis
  • A manufacturer's calibration certificate and a self test mode translate into reliable measurement and verifiable accuracy
  • Includes a NiMH rechargeable battery and charging unit
  • Precise potential free (without a ground) measurement option
  • Plastic Carrying case included
  • All Gigahertz Solutions EMF Meters are backed by a 2 year manufacturer's warranty

Designed to meet Building Biology EMF Measurement

Performance Requirements


FEATURES
  • Auto Power Off: saves on battery use – will auto-power off after 40 min of continuous EMF testing
  • Audible Tone:  audio assessment - audio signal proportional to field strength – (Geiger Counter Effect)
  • LCD Display:  easy to read 3.5 digit display
  • Frequency Filter:  built in, F1B2H31 frequency filter: four filter settings that provides manual frequency analysis:
  • 5 Hz to 400 KHz – Complete frequency range of meter – Best suited for tripod measurements
  • 16.7 Hz – Electric Railway (Europe Only)
  • 50 Hz to 400 KHz – Typical measurement setting – Captures low and high frequency emissions
  • 2 KHz to 400 KHz – High Frequency Transients and ``Dirty Electricity``
  • AC/DC Outputs:   facilitates equipment interfacing:  oscilloscopes / spectrum analyzers/full audio assessment / data logging (0.5 mV DC per digit)
  • Power Supply:  rechargeable battery (NIMH supplied) – compatible with 9 Volt alkaline battery
  • Battery Recharging Unit: 12 VDC battery charger supplied
  • Battery Low Indicator:  meter will auto-power off 3 minutes following battery low signal display
  • Operating Time:  NIMH provides 6 to 8 hours continuous use. Alkaline disposable provides up to 24 hrs continuous EMF testing
  • Self Test Mode: a ‘test for zero’ setting - verifies measurement accuracy and meter calibration (please refer to product manual for a more detailed explanation)
  • Carrying Case: sturdy plastic storage/carrying case included
  • AC Electric Field: Value displayed in Volts per meter
  • AC Magnetic Fields: Value displayed in nanoTesla ``nT``. Note: 100 nT = 1 mG
  • Single Axis Measurement: Beneficial for source detection
CALIBRATION
During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments.  This guarantees that every ME3951A meter made by Gigahertz has been individually calibrated to a traceable standard.

TECHNICAL DATA

 

SPECIFICATION

VALUE

Frequency Response

Flat Frequency Response from 5 Hz to 400 KHz

at -1 db

Electric Field Sensor

Single Axis Directional

Magnetic Field Sensor

Single Axis Directional

Signal Rating

RMS

Magnetic Field Measuring Range

Fine :0.1 - 199 nanoTesla (0.001 - 2 milliGauss)

Coarse : 1 - 1999 nanoTesla (0.001 - 20 milliGauss)

Electric Field Measuring Range

Fine:1 - 199 Volts/meter

Coarse:1 - 1999 Volts/meter

Resolution Magnetic Field

Finest Reading - Fine Range - 0.1 nT (0.001 mG)

Finest Reading - Coarse Range - 1 nT (0.01 mG)

Resolution Electric Field

Finest Reading - Fine Range - 0.1 V/m

Finest Reading - Coarse Range - 1 V/m

Accuracy / Basic Tolerance

+/- 2% @ 50 Hz, 20 degrees Celsius, 45%

relative Humidity +/- 7 Digits

Linearity Deviation

Fine-199 nT +/- 0.3 nT // 199 V/m +/- 0.2 V/m

Coarse-1999 nT +/- 3 nT // 1999 V/m +/- 2 V/m

Offset

Fine-199 nT +/- 0.4 nT // 199 V/m +/- 0.4 V/m

Coarse-1999 nT +/- 4 nT // 1999 V/m +/- 4 V/m

Dimensions

74 x 122 x 31 mm (W x L x H) approx 3 x 4-3/4 x 1.25 inches

Weight of Meter

196 grams

Case Material

Plastic

SUPPLIED WITH

  • Plastic Carrying Case – K5 (33 x 27 x 8 cm) (13 x 10.6 x 3.2 inches)
  • ME3951A EMF Meter
  • Users' Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot (5.18 meters) - for AC electric field measurements
  • Grounding Clip – For direct connection to water pipe
  • 120 VAC Battery Charger (220 VAC charger available on request)
  • 9 V Rechargeable Battery with charger/power supply

 

 

 


 

NFA 1000 - CRAFTED TO MEET THE TECHNOLOGICAL CHALLENGES OF TOMORROW

 

CALL 407.859.0006 for pricing and shipping details


The Ultimate EMF Meter with Data logging Capabilities - Measures 3D AC Electric Fields and 3D AC Magnetic Fields / Gauss Meter - Ships with "NFASoft" Data Analysis Software - Will also log RF Output.

  • The first choice of EMR professionals throughout the world
  • 3D potential-free electric field measurement
  • 3D measurement of the magnetic field
  • Ability for extensive long-term data recordings
  • Records simultaneously on 4 recording channel (CH1-3 for desired 3D measurement and optional channel 4)
  • Supplied with revolutionary PC software (NFASoft) for facilitated interpretation and documentation of the acquired data
  • Eliminates the need for X-Y-Z RMS calculations - ability to measure in single axis mode when necessary
  • Channel for recording Radio Frequency signals from the HFE59B RF Analyzer
  • Integrated Body Voltage Meter
  • USB Connection to PC
  • Standard 4 GB SD memory card supplied (upgradeable)
  • High frequency transient analysis for "Dirty Electricity"
  • Separate true RMS recordings of power line frequencies and harmonics(16.6 Hz | 50/60 Hz | 100/120 Hz plus even harmonics | 150/180 Hz plus odd harmonics | other frequencies 2 kHz)
  • Real time voice recordings, or audio input, embedded into the data screen for playback during data evaluation
  • A 'no tamper' lock feature allows for the device to be left securely on site while data logging is operational
  • Customized Geiger Counter/Audio alarm: Allows for a personalized volume and high exposure alarm
  • Broadband peak measurements (genuine peak of a wave)
  • Li-Ion rechargeable batteries for up to 48 hours of continuous recordings
  • External power supply / charger included
  • All Gigahertz Solutions Meters are backed by a 2 year manufacturer's warranty

 

Designed to meet Building Biology EMF Measurement

Performance Requirements

 

 

CALIBRATION

During the manufacturing process strict calibration procedures are followed using only high end, calibrated measurement instruments. This guarantees that every NFA1000 meter made by Gigahertz has been individually calibrated to a traceable standard.

 

TECHNICAL DATA

 

SPECIFICATION

VALUE 

Frequency Response

Flat Frequency Response from 5Hz to

1 MHz at -1db

Electric Field Sensor

3D – X Y Z

Magnetic Field Sensor

3D – X Y Z

Signal Rating

RMS, RMS Hold, Peak

Magnetic Field Measuring Range

1-19,990 nanotesla, nT

(0.01 – 199.9 milligauss, mG)

Electric Field Measuring Range

0.1-199 Volts/meter - V/m

Body Voltage

1-19,999 mV

Resolution Magnetic Field

Finest Reading - 1 nT (0.01 mG)

Resolution Electric Field

Finest Reading - Fine Range - 0.1 V/m

Accuracy / Basic Tolerance

Compensated, better than -2 dB

Dimensions

78 x 230 x 37 mm (W x L x H)

approx 3 x 9 x 1.5 inches

Weight of Meter

600 g

Case Material

Plastic case with protective silicone

SUPPLIED WITH

  • NFA1000 EMF Meter Users Guide
  • 2 Year Warranty Certificate
  • Grounding Cable – 17 foot - for AC electric field measurements
  • Grounding Clip – For direct connection to water pipe
  • Body Voltage Brass Hand Probe and cable
  • Rechargeable Battery Pack
  • 4 GB High Speed SD Memory Card
  • USB SD Memory Card Reader
  • USB Interface Cable Interface Cable - 2.5 mm to 2.5 mm – For connection to HFE59B
  • Silicone protective cover - yellow

 


Last Updated (Thursday, 16 May 2013 10:50)